Smart Solar Network Switch

Key Features:

4 POE (125W) Ports and 2 SFP Ports

Best for Camera, PTZ Camera, P2P Link, Radio, IP Phone, Security equipment and other networking equipment’s

Power Grid / No external power connection not required

Can work 24X7 with wide temperature range

Power backup can be increase as per site requirements

Ideal Solutions for Periphery, Defense border surveillance, Expressway surveillance, Highway surveillance, City surveillance, Tunnels, farm house, Power plant, refinery, National Park, Solar Farm, wind mill, Ports and all kind of remote surveillance

It is having Digital earthing so external earthing not required.

12V DC And 48V DC power supply port available for any external equipment connectivity

IP 66 enclose for outdoor application

Wide Temperature Working

Intelligent Working Capability

Breakthrough Working Capability

Safety Working Capability

Network Specifications

Provider Mode Ports
Fixed Port 2×1000 Base-X, 4×10/100/1000Base-T (POE & POE+ Support)
Power interface Redundant dual power supply (Solar & Battery)
LED Indicators PWR, Link, ACT LED
Protection IP40 rated protection, 8-15KV anti-static and 4KV surge protection
Dialing instructions
1. LFP Remote PD restart
2. LGY LEGACY (Standard/Non-Standard POE)
3. VLAN Port Isolation
4. RST Reset
Network Topology
Star topology, Bus topology & Tree topology Support
Electrical Specifications
Input voltage DC12-58V (Non-Poe), DC48-58V (Poe)
Total Power consumption <5W (Non-Poe), <125W (Poe)
PoE
Poe port 1~4
PoE Protocol 802.3af, 802.3at
Pin Assignment 1,2,3,6
Layer 2 Switching
Switching capacity 14G
Packet forwarding rate 10.416Mpps
MAC address table 8K
Buffer 1M
MDX/MDIX, Flow control, Port Isolation, Remoter PD restart, and Reset Support
Jumbo Frame Support 10K bytes
Power
Solar Panel Input capacity Up to 550W with 12V DC Supply
Battery Up to 150Ah Battery
DC Power 48V DC & 12V DC Available
USB 1 USB Ports
Protection Surge protection up to 80KA (No external earthing required)
Protection on POE Ports (4 Ports) 4KV Surge protection on each POE Ports
Mechanical
Outer Box IP 66 Box for outdoor Application
Mounting options/Installation Method Pole Mounted, Wall Mounted and Table mounted (Mounting accessories including)
Lock Physical Lock and mechanical lock options
Product size (Dimension)
Weight (Except battery)
Environment
Operating temperature and Storage temperature -30°C~60°C
Relative humidity 5%~95% non-condensing
MTBF 100,000 hours
Protection parameter (without external/Ground earthing)
Maximum surge handling capacity 120 kA (8/20 micro seconds)
Short circuit withstand current 10kA
Residual current 0.001 amps
Spark over voltage (8/20µs) 1.5kV
Impulse Response Time <25 Nano Second
Max. Leakage Current at 75% V1mA, IL (µA) 20 µA
Protection on POE Ports (4 Ports) 4KV Surge protection on each POE Ports
100W Solar Panel Specifications
Types of Module, Maximum Power 100W
Tolerance ±3%
Open Circuit Voltage 22V
Short Circuit Current 6.06A
Maximum Power Voltage 18V
Maximum Power Current 5.56A
Module Efficiency 14.9%
Solar Cell Efficiency 17.02%
Series Fuse Rating 15A
Terminal Box IP65
Maximum system voltage 1000V DC
Operating Temperature -40°C~85°C

Solar Power Network Switch Connectivity

Can we use this switch for PTZ camera, IP camera and Analogue HD Camera ?

➤ Yes, it is having 4 POE port for IP Camera and POE PTZ camera. IT is also having 12V DC power output for HD Camera power supply.

Can we use this switch for NVR, DVR and 4G Wifi Router?

➤ Yes, it is having 12V DC power supply option for DVR & NVR and also having space to keep 4 channel small DVR & NVR inside the box. You can connect 4G router on 12V DC power supply or USB and you can keep router in the box.

How much fiber length can be connected in this switch?

➤ It is having 2 Fiber port. Both are support up to 100KM single mode fiber module and support up to 550 Meter for multi-mode fiber module.

How much battery support on this device?

➤ It can support up to 180AH battery on standard model.

How much solar panel can support on this device?

➤ 330W solar panel with 12V can be connected on this standard model.

Can you customize this device accordingly our need?

➤ Yes, we can do it as per your requirement for number of POE Ports, battery backup time, Installation mechanism, extreme temperature, number of fiber ports or box size. We can do it.

Is this device need earthing connection?

➤ No, this device does not required external earthing connection because it is having inbuilt digital earthing protection.

Can we connect AC power equipment on this device, like any adaptor or TV?

➤ Yes, you can connect it in premium model with 300W Ac power port options.

Smart Solar FCBC

Key Features

Compatible with any 48V DC run equipment’s like Exchanges, IP-PBX,

Radio, Gateways,Router, Telecom equipment’s and many more

Multiple devices can connect simultaneously with different power requirements

12VDC, 24VDC, 48VDC,USB and 230VAC output on single device with sine wave power supply

It can work on solar power charging option(without electricity)

Can work with solar and power grid connections No external earthing required for connected equipment

Errors free change over during mains failure.

High operating temperatures range (-20to+55C) Very Low EMI to International standard. High EMC to lnternational standard.

Smart Solar FCBC Technical Specification

Parameter
Model 2KVA 5KVA
Capacity 80AH~220AH TUBULAR/FLAT/SMF
Number of Battery 24V 48V
Battery Boost Voltage 28.08V~29.4V±0.5V
Battery Charging Current from Solar 30Amp
Solar Panel PV PANEL OF 2000W PV PANEL OF 3500W
Solar Input Voltage 55V~107V 130V~220V
Maximum charge current (Grid) 20Amp Max.
Electricity input voltage range 110~280V±10V
Power input frequency 47 Hz~53 Hz
Output voltage range 220VAC ±5%
Output frequency 47 Hz~53 Hz
Overload >100%
Transfer Time (typical s.s.) <20 ms
48V DC Output - Maximum Current 12.5Amp
Wave & Noise 240mVp-p
Inlet wire stability ±0.5%
Load stability ±0.5%
Efficiency 88%
Adjustable range for DC Voltage ±10%
24V DC Output - Maximum Current 14.6Amp
Wave & Noise 150mVp-p
Inlet wire stability ±0.5%
Load stability ±0.5%
Efficiency 88%
Adjustable range for DC Voltage ±10%
12V DC Output - Maximum Current 17Amp
Wave & Noise 150mVp-p
Inlet wire stability ±0.5%
Load stability ±0.5%
Efficiency 85.5%
Adjustable range for DC Voltage ±10%
USB Output - Maximum Current 3.1Amp
Protection parameter (without external/Ground earthing)
Maximum surge handling capacity 120 kA (8/20μs)
Short circuit withstand current 100kA
Residual current 0.001 amps
Spark over voltage (8/20μs) 1.5kV
Impulse Response Time <25 Nano Second
Max. Leakage Current at 75% Vr 20μA
Protection on POE Ports (4 Ports) 4KV Surge protection on each POE Port

Smart Solar FCBC Application Diagram

Can we connect all the power option on this device simultaneously?

➤ Yes, you can connect 12V DC products like router and modems, 24V DC products like Radio and walky-talky, 48V DC products like Exchange and MER, 230V AC power products like all kind of Network switches Computer and USB charging products.

Can we use this device with solar only?

➤ Yes, you can use this device with solar panel for power and battery charging.

Can we use this device with electricity / Generator only?

➤ Yes, you can use this device with electricity or generator for power and battery charging.

Can we use this device with solar and electricity both?

➤ Yes, you can use. If solar power not available then it will automatically change over to electricity.

Can this device give uninterrupted power supply to all the equipment's?

➤ Yes, it will give pure sine wave power to all the equipment's.

Can we put this device in 19 inch rack?

➤ Yes, it is having 19 inch rack mounting option.

Can you customize this device accordingly our need?

➤ Yes, we can do it as per your requirement with number of battery support, number of power output option and number of output amp & voltage options.

About Us

Rasnal Telecom Started with 2 employees, today Rasnal is a team of 50 employees who are technical expertise and hold in-depth knowledge of products and offer 24×7 technical support to the customers. Rasnal, with its strong belief in providing ultimate customer satisfaction, manages to gain the trust of its customers and enjoys a reputation nationwide. Even after basking in the glory of success, Rasnal continues to improve its operations, infrastructure and train its team from time to time to continue providing the best possible customer experience in the sector of telecom and security.Rasnal is one stop solution for Telecom products, Security products, Networking products, Surge protection products and Digital Grounding products.

Disclaimer

Rasnal products are designed to meet diverse applications and deployments. Customer owns responsibility to ensure their application and deployment do not violate local laws. Customer acknowledges understanding all configuration and significance thereof. Customer owns responsibility for protecting their equipment, networks and data from hacking and misuse.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.